The
increasing demand for electrical energy to sustain
global development requires consistent heavy investment
in power supply generation. However, in addition
to complex medium and long term planning, these
investments rely on natural resources, which are
becoming depleted due to constant pressures upon
the environment.
JBR
Series - Roots Blower
3-Lobe
roots blowers are researched and develop.
The
biggest feature of this blower is a high rotation
speed (max. 4000RPM), high capacity.
Break
through of technology and the modification of
practical application.
Have
a higher effeciency, higher pressure, lower
weight and others features.
Inlet
size from 2.5" to 12".
Pressure
of single blower can be 1 Kgf/cm2.
JPX/JPXX
Series Submersible Mixer
Submersible
mixers JPX/JPXX Series include mixing agitator
and low-speed flow propeller, mainly for: Purpose
of mixing, agitating and making ring flows in
the process of municipal and industrial sewage
treatment: activated sludge tank, bioreactor tank,
mixing tank, sludge silos, equalizing reservoir,
sewage tank, improving the quality of the water
body; creating water flow, effectively preventing
the sedimentation of the suspended substances.
Compact
Mixer - MR Series
Compact
design.
More
efficient bulk flow.
The
angular contact ball bearing resists to axial
force.
Fine
Bubbles DISC Diffuser - JDD 245 & 330 Series
Low
operating costs - Reduced energy consumption
when we operated the membrane diffuser brings
considerable cost savings.
Constant
back valve - The self-cleaning design prevents
clogging and highly resistant to fouling.
High
oxygen transfer rate - Equally distributed
micro pores on the diffuser membrane. Consistently
produce 1-3mm finer air bubbles that increase
the oxygen transfer efficiency.
Simple
installation procedures - Diffuser range to
be installed on most existing air header systems
without tools required.
Extended
lifetime expectancy - EDPM membrane maintains
elasticity and is resistant to even the most aggressive
wastewater components.
Reliable
intermittent aeration operation - An integral
check-valve system makes the diffuser ideally
suited for air-on/air-off operations such as SBR's.
Fine
Bubbles Tube Diffuser - JTD Series
We
manufacturer our JTD series tube diffuser with
compression molded EPDM membranes to avoid ultraviolet
degradation or chemical corruption.
Our
tube are designed for maximal strength at a
minumum positive buoyancy.
Our
tube inlet distributors are designed for all
in one injection.
The
body support are made from PVC material.
We
us SUS 304 clamp to fix membranes on PVC pipes.
Our
slit quantity is 13,500 per 65x1000mm model.
Dewatering
Filters, Tubes and Bags
Effective
for large volume dewatering and volume reduction.
Uses
outward pressure to dewater instead of relying
solely on gravity.
Dewatering
takes place immediately and continues as tube
is filled.
Custom
designs engineered to meet your needs.
Traveling
Bar Screen
Traveling
bar screen is a fully automatic, continuously
debris removal equipment. It is designed to remove
great quantity of debris in water channel, the
equipment can be used in inlet channel of wastewater
treatment plant or pumping station.
JPR
- Submersible Aerator
With
fast industrial developments, human life became
more materially civilized. On the contrary, gigantic
quantities of waste- water were brought by the
industrial manufacturing. In the meantime, large
quantities of household waste water were also
resulted from our daily life. All these have a#ected
the living quality and damaged the environmental
ecology. Simavis has been making every endeavour
in developing the waste water treatment equipment.
In addition to waste water pumps, sewage pumps,
sludge dehydration system, the company also developed
submersible aerator and surface aerators for higher
treatment rate of BOD and COD in the treatment
of waste water. These aerators have been widely
used in domestic and overseas waste water treatment
plants.
Simavis Engineering Sdn Bhd - Submersible Pump, Water Treatment Plants & Wastewater Treatment Systems
For
any inquiries or questions regarding the above product
& services, please contact us in the folllowing
ways:
contact us: +603
8081 9685 or email us: simon@jmisimavis.com